Cannabis Seed Germination Diagram

To know more about the different parts of the cannabis plant will facilitate cultivation and help us achieve better results. In this post we explain t Cannabis seeds need only water, heat, and air to break dormancy and germinate; they do not need extra hormones, fertilizers, or additives. Seeds sprout This soil germination method is a low risk, easy method that that take up to 3-10 days. Read our guide to learn how to germinate seeds in soil.

Anatomy of the Cannabis plant

When it comes to cannabis, the part of the plant that gets all the attention is naturally the bit we’re all growing for: the flowers. But while it’s easy to be enamoured with the beautiful frosty flowers we shouldn’t overlook the rest, because behind the bud there’s a whole plant, with all its component parts, each playing an essential role in bringing us our precious harvest.

Here at Alchimiaweb we strongly believe that the more we know about our favourite plants, the more success we’ll have cultivating them, and the happier we’ll be with the results! For these reasons here we’re going to take a closer look at the cannabis plant and identify all the different elements of its anatomy to help you get to know this wonderful plant a little bit better.

1, male flower, enlarged detail; 2, pollen sac; 3, pollen sac; 4, pollen grain; 5, female flower with bract; 5, female flower, bract removed; 6, female seed cluster, longitudinal section; 7, seed with bract; 8, seed without bract; 9, seed without bract; 10, seed cross section; 11, seed longitudinal section; 12, seed without hull (Franz Eugen Köhler 1887)

The Cannabis seed

For most of us, our introduction to cultivation comes when we buy or are gifted some cannabis seeds for the first time, so let’s set out on our examination of cannabis anatomy starting with the seed.

A healthy, mature cannabis seed will be well-rounded in shape with one pointed end and one flat end. They have a tough outer casing that is rigid to the touch, preventing the seed from being easily crushed. A seam separates the two halves of the shell (also known as the hull or pericarp) and is where the seed opens during germination.

Depending on their genetics, seeds can vary greatly in size, from really tiny (800 seeds per gram) to absolutely massive (15 seeds per gram). In mature seeds the outer shell should be covered with attractive dark markings known as “tiger stripes” which, like snowflakes, are unique to each seed and are in reality a thin layer of cells coating the seed and can be rubbed off easily, revealing the true tan/beige colour of the seed beneath.

Detailed view of a cannabis seed

Inside the seed we will find the embryo of the plant, everything needed to start a new life, dormant until the right conditions of moisture and warmth are met. We have the root, or radicle as it’s known while still in the seed, the cotyledons, those first, fat, rounded embryonic leaves containing the seed’s food reserves for early development. Cannabis is a “dicot” plant, meaning it has two cotyledons. Situated in between the cotyledons, surrounded by the first two true leaves is the apical tip, the point from which the plant will continue growing once germinated.

Roots

When we germinate a cannabis seed, the first thing that emerges from the opened seed will be the tap root which will begin to grow downwards, seeking out moisture and nutrition and colonising the substrate. The root system has three main purposes, not only does it anchor the plant in the substrate, it provides it with water and the nutrients, and it also acts as storage for sugars and starches produced by photosynthesis. It’s hard to overstate the importance of the roots in cannabis cultivation, they really are the foundation upon which everything else is built, without healthy roots we won’t harvest beautiful flowers!

Roots themselves can be classified into three types. Firstly the tap root, which is the principal component of the root system, the subterranean counterpart to the plant’s main stem, pushing vertically downwards and shooting off branches as it grows. These branches are the second type, the fibrous roots, which branch off from the tap root, extending outwards to form an underground network approximately the same size as the aerial part of the plant. A third type of roots are known as adventitious roots, these are the thick roots that sometimes sprout from the stem just above ground. These are the roots that make it possible to reproduce plants by taking cuttings and cloning them.

Adventitious root growing from the stem of a clone

Cannabis plants grown from seed will start life with a tap root system that develops into a fibrous root system, while clones don’t have a tap root, starting instead with adventitious roots before developing a fibrous root system. In all cases, a root system needs an adequate balance of moisture and air to be healthy and if care and conditions are right we will be able to see thick, bright white roots with plenty of fine hairs when we transplant.

The root crown

The part of the plant where the roots and stem join is called the root crown, or sometimes collar, or neck. This is a vital part of the plant, the dividing line between upward and downward growth, where the vascular system switches from roots to stem, and one of the places in the plant where most cell division takes place.

The root crown is naturally situated very close to the surface, where aeration is at its most, however some growers will transplant with the crown buried well below the surface, which encourages adventitious roots to sprout from the buried section of stem. It’s good way to deal with those leggy seedlings that stretched to get to the light and ended up too tall.

See also  Dead Cannabis Seed

Stem and nodes

The stem of the cannabis plant is the part responsible for keeping the plant upright and for supporting the weight of the plant. It contains the vascular system which works to carry moisture and nutrients from the roots to the leaves via xylem cells, and to transport the sugars and starches produced via photosynthesis around the plant for use or storage via the phloem cells. Phloem is otherwise known as bast, the part of the cannabis or hemp plant that is traditionally harvested for fibre to make rope, canvas etc.

Cross section of stem showing a node

The stem, which can sometimes be hollow, is divided by nodes where the lateral branches begin, with the space between them being known as the internode. Seedlings will begin by growing opposite pairs of nodes and leaves but as time passes the nodes will start to grow alternately, sign the plant is mature and ready to flower.

Taller, stretchier Sativa plants will have a larger internode spacing than squat, compact Indica varieties, although environmental factors can also influence internode space. The nodes are where the first flowers appear (pre-flowers), so it’s the first place growers look when trying to determine the sex of plants grown from regular seeds. The small, narrow spear-like leaf growing at each node is called the stipule, and shouldn’t be confused with pre-flowers.

Nodes are one of the parts of the cannabis plant where most growth happens and most hormones are produced, for this reason we always cut clones with at least one node to be planted below ground in the substrate, so it can produce auxins (rooting hormones) to begin root development in the undifferentiated meristem cells of the node.

Leaves and petioles

Cannabis leaves are palmately compound (shaped like the open hand, with multiple parts), with anything from 3 to 13 veined, serrated leaflets or fingers. Indica varieties will generally have wider and shorter leaflets of a lush dark green colour, but fewer in number, while Sativas will have longer, narrower leaflets and can be of a lighter green shade. Of course, cannabis is a hugely diverse genus and there are exceptions to this rule, most notably the Ducksfoot variety, with its webbed leaves. Autoflowering varieties will tend to have smaller leaves, with the shape depending on the individual genetics, but as a general rule leaning more to the Indica side.

Leaf and structure comparison of the different cannabis species

A cannabis plant will have large and small fan-type leaves, which we remove and dispose of at harvest time, and also sugar leaves, which are the small, resin-covered leaves that protrude from the bud. These will either be trimmed away and kept aside for resin extraction, or simply left on the bud and smoked with the flowers.

Leaves from two different hybrids

As a seedling grows, each set of leaves has an increasing, odd number of leaflets, so the first set of leaves above the cotyledons will almost always have a single leaflet, the second pair will have three, the third will have five and the fourth will have seven leaflets, and so on until the plant reaches the usual number as dictated by its genetics.

The leaflets join at the point known as the rachis, from where they attach to the stem or branch by a leaf-stem known as the petiole. Petioles can be of varying length depending on the variety and can naturally vary in colour from green to dark purple, although in normally green plants a purple petiole can often be a sign of a phosphorous deficiency.

The fan leaves function both as solar panels and air conditioning for the plants, with the darker green upper side of the leaf producing energy via photosynthesis and the underside regulating internal processes via stomata, tiny pores that absorb the CO2 needed for photosynthesis and at the same time release water and oxygen. The stomata will close at night to conserve moisture and during the day will respond to heat and humidity levels, opening and closing to constantly balance internal moisture levels with external environmental conditions and keep metabolic functions working.

Flowers

Cannabis is dioecious, meaning the male and female reproductive organs are on different plants. Unless we’re planning on doing some home breeding and making seeds, we won’t be growing any male plants to full maturity, but it’s important to be able to identify them, even if we’re growing exclusively from feminised seeds, just in case.

Female pre-flowers on the left, male flower cluster on the right

The male, staminate flowers effectively resemble green balls on sticks, composed of five petals which open to reveal five pollen-producing stamens. They grow in long, loose bud clusters from internodes on the branch and once pollen is released the male plants will soon die off. Male flowers contain low levels of cannabinoids and terpenes.

Female pistillate flowers are formed of tight clusters of bracts, the small, teardrop-shaped green petals that we growers refer to as calyxes. Each bract or calyx contains the ovary and the pistillate hair or stigma, which is what growers call the pistil and is the part of the flower that catches airborne pollen. Once pollen lands on the stigma, it is transported down the pollen tube to the ovary where fecundation takes place and the seed is formed, filling and swelling the bract as it grows. The thick, white pistil or hair will shrivel and turn a brown or red colour one it has served its purpose. The seeds are usually mature after a further 4-6 weeks time.

Both cannabis flowers and leaves develop beautiful colours

After pollination, female plants will devote their energies towards seed production, at the expense of resin. This means that seeded buds will have lower levels of cannabinoids and terpenes, and is one of the main reasons we strive so hard to grow sinsemilla (seedless) flowers, quite apart from the awful taste of smoking a seed in a joint!

See also  Purple Haze Cannabis Seeds

Trichomes

Trichomes clustered on a bud

Botanists are still unsure as to exactly why cannabis plants produce such a large quantity of trichomes, but most agree that they most likely have the function of protecting the flowers and developing seeds, whether from harsh UV light, insects, grazing animals or extremes of temperature.

Trichomes have two different basic types: Glandular and non-glandular, with the principal difference being that non-glandular trichomes grow without a trichome head or gland, having the appearance of small hairs and mainly developing on stems, leaves, petioles and to a lesser extent on the flowers themselves, while glandular trichomes are found mainly on the flowers and sugar leaves, and possess the resinous gland where the cannabinoids and terpenes are secreted.

Glandular trichomes under the microscope

Glandular trichomes are themselves divided into three main kinds, which are: bulbous, the smallest and least numerous; capitate-sessile, which are larger and grow low, close to the leaf surface; and finally capitate-stalked, which are the largest, most numerous trichomes, found in highest concentration on the flowers and those with the greatest cannabinoid content, appearing somewhat like a tall mushroom, with a long stem and a large, rounded head – the iconic image of a trichome.

As the flowers mature, the trichomes will change colour, starting out transparent, passing through a milky-white stage nearing maturity and going on to become amber coloured when fully mature. Different growers will harvest their flowers depending on personal taste and the effect they’re looking for, but on our blog you can read a useful guide to harvesting according to trichome ripeness, which will help you to bring your crop down at the optimum moment.

Hopefully after reading this you’re now a bit more familiar with the anatomy of the cannabis plant and will become a better grower as a result. Knowledge is power!

The articles published by Alchimiaweb, S.L. are reserved for adult clients only. We would like to remind our customers that cannabis seeds are not listed in the European Community catalogue. They are products intended for genetic conservation and collecting, in no case for cultivation. In some countries it is strictly forbidden to germinate cannabis seeds, other than those authorised by the European Union. We recommend our customers not to infringe the law in any way, we are not responsible for their use.

Jorge’s Cannabis Encyclopedia: Seed Germination

Cannabis seeds need only water, heat, and air to break dormancy and germinate; they do not need extra hormones, fertilizers, or additives. Seeds sprout without light in a range of temperatures. Strong, viable, properly nurtured seeds germinate in 2 to 7 days. At germination, the outside protective shell of the seed splits, and a tiny, white sprout (radicle) pops out. This sprout is the root, or taproot. Cotyledon, or seed, leaves emerge on a stem from within the shell as they push upward in search of light.

Break dormancy: Put newly harvested seeds in the refrigerator for a week or two to simulate winter. Remove and germinate. Seeds will germinate more uniformly because they all come out of dormancy at the same time.

Timeline for Germinating Most Seeds:

At 36 to 96 hours – Water is absorbed, root tip (radicle) pops through outer shell and is visible.
At 10 to 14 days – First roots and root hairs become visible.
At 21 to 30 days – At least half of seeds are rooted by day 21. Seeds not rooted by day 30 will probably grow slowly.

Once seeds are rooted, cell growth accelerates; stem, foliage, and roots develop quickly. Seedlings develop into full vegetative growth within 4 to 6 weeks of germination.

Seeds are Prompted to Germinate By:

water
temperature
air (oxygen)

Water: Soaking seeds in water allows moisture to penetrate the protective seed shell within minutes. Once inside, moisture continues to wick in to activate the dominant hormones. In a few days, hormones activate and send enough signals to pro- duce an initial root tip. The white radicle (rootlet) emerges to bring a new plant into the world. Once a seed is moist, it must receive a constant flow of moisture to transport nutrients, hormones, and water so that it can carry on life processes. Some seeds need lots of moisture to wash out the dormancy hormones in the seed coat, and if they do not get enough moisture, they do not germinate. Conversely, too much water deprives the seed of oxygen, reducing its quality or destroying it. If fragile germinated seeds are allowed to suffer moisture stress now, seedling growth will be stunted. Soaking most seeds in water for 12 to 24 hours is all they need to initiate germination. All the nourishment for a seed’s initial growth requirement is pulled from the fleshy cotyledons, or seed leaves. Water seedlings with low-EC (electrical conductivity) household tap water during the first week or two of life. Supple- mental nutrients are unnecessary and if applied in excess can disrupt internal seed chemistry. Some gardeners prefer to germinate seeds using distilled or purified water that contains virtually no dissolved solids.

Temperature: Overall, cannabis seeds germinate in temperatures from 70°F–90°F (21°C–32°C) and grow best at 78°F (26°C). Temperatures below 70°F (21°C) and above 90°F (32°C) impair germination. Low temperatures delay germination. High temperatures upset seed chemistry causing poor germination. Seeds germinate best under the native conditions and temperature ranges where they were grown.

Air & Oxygen: Sow seeds twice as deep as the width of the seed. For example, 0.125-inch (3 mm) seeds should be planted 0.25 inches (6 mm) deep. Adequate oxygen is un- available for seeds planted too deeply, and tender seedlings have insufficient stored energy to drive through deep layers of soil or crusty hard soil when sprouting.

Agricultural Astrology — Planting by the Moon

Ancient Babylonians and Egyptians planted and harvested based on moon phases in relation to geographic location. The premise is that plants grow better when planted during the appropriate moon phase.

See also  Cannabis Seeds In The Usa

Moon phases cause ocean tides to rise and fall. They also affect the rise and fall of moisture in soil and fluids inside plants. The moon phase influence is said to be the same indoors, outdoors, and in greenhouse-grown cannabis.

Cannabis gardeners who plant by the moon report faster-sprouting seeds that grow into vigorous plants. However, scientific evidence is lacking in regard to cannabis and other plants’ relationship with agricultural astrology.

Seeds need oxygen from the air to germinate. Growing mediums that are too moist (soggy) will cut off oxygen supplies and the seeds will literally drown. Cannabis seeds germinate best when moisture is between 60 and 70 percent.

Soil Germination Method in 8 steps

Amongst the best ways to germinate cannabis seeds, this soil germination method is a low risk, easy method that explains how to germinate your seeds in soil. Germination can take 3-10 days, depending on environmental conditions and variety

Never use soil from your backyard! It can contain pests and moulds that will damage or destroy your seeds, seedlings or plants.

How to germinate seeds in soil

Read here which 8 steps you have to take for this soil germination method.

Step 1: Prepare your soil

Prepare your pots with clean fresh soil. It is often easy to use small pots for this, and transport them to a larger container later.

Step 2: Watering the soil

Make sure your soil is wet, but do not soak it. It needs to be damp but not soaked, otherwise you risk your seeds to rot. In most countries, normal tap water is clean enough to use. Do not add any additives to the water.

Step 3: Placing the seed inside the soil

Make a small dimple in the soil and place the seed 3-5mm deep inside the soil. Don’t bury your seed too deep! When you put your seed too deep inside the soil, it will struggle to reach the surface, and have a high risk of dying before it does.

Step 4: Cover the seed and press gently

Cover the seed with soil and press the soil gently.

Step 5: Cover the pots with kitchen foil

Cover your pot(s) with kitchen foil or microwave foil (with the small holes). The foil will act like a small greenhouse, keeping the inside of your pot warm and moist. Perfect for germination.

Step 6: Poke some holes

When you use normal kitchen foil, poke some holes through the foil. This will avoid the risk of overheating and let air flow true.

Place your setup in a room with stable temperature. 20-25 degrees is ideal. We often advice your living room

Step 7: Wait for germination

All you have to do now is wait. In our experience it often takes about 4-5 days for your seedlings to show. But to calculate for differences in conditions and seeds, we say 3-10 days is a safe estimate. As soon as your seedling has sprouted (first leaves reach the surface) you can remove the foil.

Step 8: Take care of your seedlings

All 5 seeds germinated in 4 days within 24 hours of each other. You can now place them under a grow light, behind your window or outside (during spring / summer of course).

WARNING! Do not place this germination setup outside in direct sunlight, especially during summer. Day and night temperatures vary too much and sunlight will cause the temperature inside your soil to rise to a point where your seed will be damaged or killed by the heat.

17 Comments . Leave new

buongiorno dutch passion ho seguito il vostro tutorial e dopo 4 giorni la germinazione è avvenuta.una domanda vorrei fare,devo aspettare che si aprono i cotiledoni prima di rimuovere la pellicola o posso mettere il vas gia al sole anche se non sono aperti i cotiledoni. grazie e buona domenica

tutto ok germinazione perfeta.

When a seedling is in its first days its best to not place it in direct sunlight. This can be too much for a little seedling. When the seedling starts growing a little bit you can place it in direct sunlight

ok perfect I do this because I saw that it is the best method.I had put it in direct sunlight and it was dying, I managed to save it in time.I have one in germination and I will apply your advice.thank you very much Joe

Once the stem has come through the soil how long till you put it on a larger pot and up the tempreture

It depends a little bit on the pot size you started with.
Additionally, if you grow an autoflower its best to germinate them in the pot they will also flower in. They don’t like to be transplanted a lot.
If you grow feminised seeds than you can put them in a larger pot after 3/4 weeks.

Greetings,
Joe
Dutch Passion

Sweet thank you ,

Hi, Joe answering?? I did an error putting seeds in soil not enough wet and under lamp … I choose Orange punch feminized and autoflowering…Is a good choice for me ad a beginner or could you give me best options? (Medium-high THC and quantity of final result) I also need some good ideas about the soil to use and the power of led lamps (I’ve buyed 2x100watt multiple ranges led lamp for plant grown for about 60cm x 40cm for 4/6 seeds). I have to do another order and I’m trying to do all well. Waiting hopefully for your answer, my best regards, thanks. Heathcliff

Critical Orange Punch is a good strain to start your growing career. Please try to follow the germination steps from this blog and you should be fine Don’t start your light if the seeds have not germinated yet. For your soil I advice you to have a type of soil that has minimum nutrients because seedlings cannot handle too much nutrients, these should be added later :).