How To Dramatically Boost Yields With Cannabis Lollipopping
Cannabis plants have a finite amount of energy. As a grower, you’ll want to help them direct energy to the areas producing the best possible bud. As it turns out, lollipopping is one of the best ways to do just that. It’s a pruning technique that’s meant to enhance the buds at the top, pairing well with other techniques like ScrOG and mainlining.
Lollipopping is a pruning technique that helps your cannabis plants focus their energy on their biggest bud sites, usually around their canopies. It’s easy, low-stress, and it can help you produce heavy harvests of some exceptional buds. Read on to learn more about lollipopping your cannabis.
THE BENEFITS OF LOLLIPOPPING
Cannabis plants, like any other, generate energy from the light, water, and nutrients they take in from their environment. This energy, however, is limited. Lollipopping, as it’s referred to among growers, is all about helping your plants focus that energy on developing buds in the right places. More specifically, it shifts focus towards parts of the plant that receive the most light.
Untrimmed or untrained cannabis plants grow like Christmas trees. By the time they’re ready to flower, it’s likely they’ll have developed a dense canopy that allows very little light to break through. This means, of course, that light won’t reach the bud sites toward the bottom. Left untouched, these lower nodes will produce small, airy “popcorn” buds that lack potency, flavour and aroma, and bag appeal.
Lollipopping involves removing growth up to a certain point on each branch of your cannabis plant to maximise efforts towards the topmost bud sites. By lollipopping, you not only help direct light to the right nodes, but optimise the limited energy stores of your plants. The end result is a heavier harvest of big, dense buds with maximum potency and flavour.
HOW TO LOLLIPOP YOUR CANNABIS PLANTS
Lollipopping is a simple technique, but you should still exercise caution. You’ll want to lollipop your plants just before they begin flowering. We also recommend pruning—removing unnecessary branches—as well, although you should proceed slowly, and with a plan.
- Start with sharp, clean shears to prune your plants. Our curved trimming scissors, for example, are great for making precise cuts close to the nodes. For bigger, thicker branches, invest in a pair of shears. Begin by removing obvious foliage. The first few branches near the bottom of your plant obviously won’t get enough light to develop fully. Get rid of these first.
- Once you’ve taken care of the most obvious problem areas, we recommend following Kyle Kushman’s pruning advice and removing any branches that don’t break at least 50% of the height of the plant. As your plants stretch during the early weeks of flowering, these branches will get shaded out and never develop properly. Lollipopping doesn’t have to involve removing entire branches, but pruning is often used in tandem as necessary.
- Next, start removing branches growing in the middle of the plant, specifically those underneath the canopy. Not only will they likely not get enough light, but this interior foliage also covers up a lot of sites that could develop into sizable buds. Also at this stage, you should remove any branches or leaves that are dying or yellowing.
- Finally, you’ll want to get to actually lollipopping each individual branch on your plant. Some growers recommend leaving no more than three nodes from the tip of each branch. That, however, depends a lot on the strain, the size, and the health of the individual plant. The time at which you’re pruning also comes into play. If your plants are smaller and you’re trimming late, for example, we recommend trimming below the top 4/5 nodes. In any case, remove all the growth leading up to the topmost nodes on each branch.
Once you’ve lollipopped each branch, we recommend giving your plants 2–3 days to recover before flipping your lights. Also, remember not to over-prune as this can stunt their growth. If you’ve never tried lollipopping before, start slow and work your way up to an ideal pruning strategy.
LOLLIPOPPING VS DEFOLIATION — UNDERSTANDING THE DIFFERENCES
Defoliation is not the same technique as lollipopping, but many growers get the two confused. While they both involve removing leaves, lollipopping focuses on the bottom part of a plant. Essentially, it’s all about removing growth that doesn’t get enough light. This process allows plants to focus energy on developing buds at the top of their canopy, where light is abundant. Visually, lollipopped plants have bare stems with no foliage towards the bottom, similar to a lollipop stick.
On the other hand, defoliation is all about improving light exposure and airflow for all parts of the plant. Rather than giving exclusive preference to buds at the top, defoliation gives all buds a chance. If you want to try it out, we recommend reading deeper into the defoliation process and the benefits it can offer.
COMBINE LOLLIPOPPING WITH SCROG AND MAIN-LINING
To really improve the size and quality of your yields, we recommend coupling lollipopping with other training techniques.
Main-lining, for instance, is the key to controlling the natural apical dominance of cannabis plants. It involves using a combination of topping and LST to create symmetrical plants with a Y-shaped, manifold-like main stem. Every time you do this, you multiply the number of colas your plant develops and help evenly direct its flow of energy to all of its branches.
This, in particular, is a technique that goes extremely well with lollipopping. When combined, these two techniques not only maximise the light in your grow space, but also enhance your plants’ energy for bud production.
Besides main-lining, lollipopping also works exceptionally well with ScrOG. Remember that ScrOG is all about developing an even canopy by weaving growth through a mesh screen. By coupling ScrOG with main-lining and lollipopping, you’ll be helping your plants direct energy evenly and efficiently towards this canopy.
START LOLLIPOPPING TODAY!
If you’re approaching flowering time, we highly recommend trying the lollipopping technique before flipping your lights. Remember, though, you should start slow and with reserve. If you’re new to this technique, consider trying different degrees of lollipopping and pruning on different plants of the same strain, then compare your results during harvest time to find that sweet spot.
Heard about cannabis lollipopping? Click here for an in-depth look at this technique, how it works, and how to use it produce bigger yields of better weed.
Lollipopping Cannabis: How to Do It Right!
Lollipopping a growing cannabis plant means to remove most growth from the bottom of the plant that aren’t getting light, while leaving untouched all the vegetation and bud sites at the top of the plant. This marijuana lollipopping tutorial will teach you how to increase your yields using this technique!
“Lollipopping” means removing bottom growth (which isn’t getting light) so that plant focuses on bud sites at the top
This plant was grown naturally and it looked like this right before it was put into the flowering stage. It is a perfect candidate for lollipopping.
Soon after the plant started making buds, the grower noticed the bottom buds weren’t getting any light, and as a result they weren’t getting bigger. In order to help the plant focus on the top buds, the grower removed all the lower bud sites and leaves (“lollipopped the plant”).
That cannabis plant just before harvest. As you can see, every part of the plant is completely filled with buds, though notice how even though it’s been lollipopped, all the biggest buds are at the top.
Buds that don’t get light never fatten up properly. In fact, the whole idea behind defoliation in the flowering stage is to increase the amount of light that gets to bud sites.
Buds lower down on the plant stay the small even if they get direct light from the sides. This is why many growers train their plants to grow flat (all the buds become top buds!) in addition to lollipopping.
Tip to Lollipopping Cannabis for the Higher Yields
I have had the best results lollipopping cannabis right before the switch to the flowering stage. Growers often don’t need to lollipop in the vegetative stage unless you haven’t trained your plant and it’s gotten very tall or out of control.
Growers call the technique “lollipopping” because you’re making the bottom bare like a lollipop stick ? But keep in mind that removing too many bud sites can definitely hurt your yields!
This grower stripped all the buds sites from the bottom of the plant while lollipopping, resulting in shortened colas. I’ve done this, too! His yield would have been bigger if he’d allowed those bud sites to continue further down on each stem!
To prevent the problem with the plant above, avoid removing or damaging future bud sites whenever defoliating. It’s easy to accidentally damage bud sites when they’re just tiny pre-flowers like this one, so be extra careful when removing leaves!
Experiment with different amounts of lollipopping to see what’s best for you! However, keep in mind…
- CFLs and fluorescent grow lights don’t penetrate as deeply as more powerful lights. As a result, it makes a lot of sense to lollipop plants that have gotten taller than the lights can reach
- HPS, LEC and LED grow lights all penetrate much more deeply into the canopy. As a result, you do not need to lollipop as much, because more of the bottom will be getting direct access to light. You don’t want to remove growth that is getting light as it will turn into buds!
- Learn my exact technique from seed to harvest on how to train, defoliate and lollipop!
You Might Be Interested in One of the Following Cannabis Plant Training Tutorials…
Detailed Breakdown of Training Techniques
Lollipopping Cannabis: How to Do It Right! Lollipopping a growing cannabis plant means to remove most growth from the bottom of the plant that aren’t getting light, while leaving untouched all