The Best Cannabis Bloom Booster
Inicio » Products » The Best Cannabis Bloom Booster
What is the best bloom booster for cannabis? This is one of the most frequently asked questions by cannabis growers due to the fact that bloom boosters can help your plants to produce delicious flavors, aromatic hints, high yields and prettier flowers in general. That’s why these types of products are used a lot when growing cannabis and in gardening in general.
Generally, growers with less experience tend to work with basic products for the growth and flowering period, without adding any other type of ingredient for the pre-bloom period – maybe a bud fattener, at most, with a bit of phosphorus and potassium. Stimulants tend to be forgotten or simply the grower does not have enough knowledge to know how to use them.
For these reasons and many more, we’re going to recommend some of the best bloom boosters for cannabis plants, what their effects are and how you should use them to get the best possible results.
Cannabiogen Delta 9 | Bloom Booster
Delta 9 by Cannabiogen is a great bloom booster for various reasons, including its list of complex ingredients and the amazing results that it offers. It’s also one of the most copied products out there; until recently, there weren’t many products on the market that offered the same results as this product, until Delta 9 appeared.
How to use Cannabiogen Delta 9
Before using, make sure that your water isn’t rich in lime; use distilled or osmosis water. If you don’t, you may cause accidental over-feeding or a bad reaction with Delta 9.
- It may be counterproductive to use doses over the stated amount or apply too frequently.
- Spray Delta 9 ten days before your plants begin to flower, 4-6ml per liter of water.
- Ten days after spraying, use the same dose when watering.
- Repeat again ten days later.
- Just three doses should be enough to get the amazing results Delta 9 is capable of producing.
When used correctly, Delta 9 can increase resin yield about 20%, as well as overall yield up to 20%. Your plants will begin to flower much earlier, and they’ll have enough energy to flower almost flawlessly, producing shorter internodes.
Advanced Nutrients Bud Ignitor | Bloom Booster
Bud Ignitor is a flowering stimulant that’s highly valued among professional cannabis growers due to its interesting properties. You’ll need to start using it right before the pre-bloom period starts in order to get the best possible results. Depending on the strain you’re growing, you’ll need to use it for more or less time.
How to use Advanced Nutrients Bud Ignitor
You can use this product once or twice a week, depending on the size of your plants, although for the best possible results you should use it twice a week. On the one hand, it’s important to know exactly what kind of strain you’re growing and keep their flowering times under control; when used at the wrong time, you may get unwanted results- We recommend using this booster as soon as you flip your plants’ light schedule and they begin to pre-flower.
- Use 1-2 times a week. 2ml/L with or without their normal feed.
The reason people keep coming back for more Bud Ignitor is that, apart from accelerating the start of the flowering period slightly, it also increases the amount of short internodes on your plants. Your plants will therefore be able to yield more flowers, increasing your final yield by quite a lot.
Grotek Blossom Blaster | Bloom Booster
Blossom Blaster is a highly concentrated booster that contains quality minerals. It can be acquired in both liquid and powder format. It’s used to accelerate your plants’ natural processes, creating flowers earlier and giving them a bit more energy. If you want to make the most out of this product, you’ll need to use Monster Bloom afterwards; this product is used to fatten up the buds that you’ve created using Blossom Blaster.
How to use Grotek Blossom Blaster
Grotek recommends a weekly dosage on their nutrient chart – if you want to use this product more times a week, you will need to divide the recommended amount. If you forget to do this you’ll start seeing clear signs of overfeeding after around 2-3 weeks.
- Use 0.1g/L during the first flowering week and the third flowering week.
Blossom Blaster is capable of producing a faster flowering period, and plants capable of yielding much larger flowers, shorter internodes and plenty of energy which allows them to produce much faster and larger flowers.
Top Crop Big One | Bloom Booster
Big One by Top Crop is the perfect stimulant for organic cannabis growers; it contains 23% Ascophyllun Nodosum algae, and comes with a SHC seal that guarantees that it’s 100% permitted for organic use. It’s also one of the most affordable products on the market and one of the most efficient ones; organic algae offer amazing results.
How to use Top Crop Big One
Due to being a highly concentrated product, we don’t recommend going over the recommended dose, and if you’re using it alongside the rest of Top Crop’s products, you’ll need to halve the dose or you risk overfeeding your plant. It can be used via water or spray.
- Use 2ml/L of water or spray 10 days before the pre-bloom period starts.
- Repeat the process twice more every 10 days.
Big One helps you to increase the size of your plants’ flowers about 40%, and in the best possible case it can help increase resin yield by 30%. On the other hand, it gives your plants energy for the flowering period, it increases their strength, general appearance, and gives the final product a much higher quality. The best thing about this product is that, due to its organic nature, it increases aroma and flavor by quite a lot.
This is just a small amount of the many flowering stimulants that are currently on the market – there’s a never-ending amount of brands and companies that make products like these for different kinds of growers; although these are just some of the bloom boosters that are best for cannabis growers.
Find out what the best bloom booster for marijuana is, how to use it and the effects that it will produce on your crop. Keep reading!
7 Tips to Improve Cannabis Bud Quality
by Nebula Haze & Sirius Fourside
Table of Contents
- Start with Top-Shelf Genetics – get the effects and appearance you want! Your grow skill makes a huge difference, but a plant can’t overcome its genes! If you want buds that are potent, dense, sparkly or purple/pink, you need the right genetics.
- Give Your Cannabis Lots of Light! – this increases yields, density and potency
- Nutrients & Supplements – learn about smell enhancers, bloom boosters and bulk builders!
- Better Taste, Better Smell – learn other techniques to increase terpene content so buds taste and smell better
- Manipulate Temperature & Humidity in the flowering stage to increase resin production (“glitter” and stickiness), bring out colors like pink or purple & prevent smells from burning away
- Great Air Flow Around Every Cola – you can gain surprising increases in the size and density of your buds by making sure that every cola gets lots of direct light and good air flow from the beginning to the end of the flowering stage. Cannabis is wind-pollinated in the wild and so more energy is put into buds that have been exposed to a breeze from when they first started forming.
- Master the Basics of Growing – especially harvesting, trimming and drying/curing! Although a lot of growers don’t pay as much attention to what happens to plants after harvest as during the grow itself, these 3 post-harvest factors determine almost 50% of your final bud appearance. Properly drying/curing also intensifies smell and increases bud potency!
Have you ever had weed that knocks your socks off? The kind of cannabis buds that people brag/warn their friends about?
I’m talking about the really really good stuff!
The truth is, you can successfully grow cannabis with very little effort, make a ton of mistakes, and still harvest buds that will do the job.
But have you ever wondered how people grow truly top-shelf buds? The kind of bud that beats the marijuana you get in a dispensary?
If so, you’re in luck, because today I’m going to teach you 7 tips to consistently growing top-tier quality cannabis buds with effects that will stick in your memory for years to come. Plus, I’ll teach you how to make your cannabis look pretty!
1.) Start with Top-Shelf Genetics
It’s really tough to get truly top-shelf buds if you start with mid-grade seeds, clones, or the dreaded bagseed; you’re giving yourself a much higher chance of disappointment because no growing method can overcome genetics!
These buds were both grown in the exact same setup at the same time, but have different genetics. Look how differently the buds turned out! Choosing the right strain lets you choose the looks and effects you want!
When I first started growing, I would grow any seeds I could find. These would usually grow pretty well but the resulting weed never ended up being as good as the buds I found them in. And sometimes the buds would be airy and not-that-potent.
After a few attempts at growing bagseed, I tried buying marijuana clones from the local dispensary with crazy strain names like “Super Grand Daddy Purple” and “Grapefruit Bubblegum Kush,” but my yields and results still left a lot to be desired. It’s not that there’s any inherent problem with clones – clones are awesome! – but I got a feeling these plants weren’t really the strains the dispensary claimed them to be. I didn’t have any grower friends at the time and I thought bag seed and local clones were my best choices.
Until I discovered online seed banks.
Ever since I started buying seeds from a reputable cannabis seed bank and getting my chosen strains shipped to me, I have been able to consistently produce high-quality buds!
Getting your genetics from a reputable breeder is key to producing gorgeous and potent buds!
If you want to grow buds that are pink or purple, you must choose the right genetics!
Just switching to better seed stock caused a dramatic increase in my yields without any other changes. But even more importantly, the quality of my harvests drastically improved. Not to mention the freedom of being able to choose which strain you want to grow instead of hoping to find a good seed in your buds!
Clones are still a great way to start a grow with good genetics, but you have to make sure you always get clones from a trustworthy source!
If you want to take your quality to the next level, don’t start with just any clones or seeds. Search for the right, true quality genetics and don’t be afraid to research to make sure you’re getting exactly what you want! Good seeds cost more than bagseed, but the money you pay for quality is worth it, especially when you consider what you’re getting in return!
2.) Give Your Cannabis Lots of Light!
If you want great bud, you have to provide plenty of light!
When you start a grow with good genetics – from good seeds or clones – your plant has the potential for a high level of quality (yields, potency, resilience). However, it’s nearly impossible to get your buds to reach that potential if you use lights that are underpowered.
Powerful grow lights like HPS, LECs or LEDs produce the biggest and most dense buds
For example, there’s no amount of plant training or growing skill that can make up for the amount of light produced by an incandescent bulb; the bulb simply doesn’t have what it takes to do the job.
Similarly, growers can have the same problem when they try to grow a larger plant with a few small CFLs or T5s. Although CFLs and T5s make great growing lights and produce a high-quality product, it’s important to pick the right tool for the job. These two types of lights are better at stealth, discretion, and smaller grows than producing lots of super potent bud.
Strong, bright light is what powers the growth of buds in the flowering stage – light is like “food” for your plants!
When it comes to indoor cannabis gardening, more light is better…to an extent. If you give your flowering cannabis plants all the light they can handle without giving them too much, it increases your potency, density and yields.
Strong, bright light is a crucial part of reaching a strain’s full potential!
Strong light is incredibly important for the highest bud density, potency and yields!
3.) Nutrients & Supplements to Increase Bud Quality
First, before adding any special supplements, you need to make sure you’re giving your plant the correct base nutrients in the flowering stage.
Base Nutrients in the Flowering Stage
- Low Nitrogen (N) – Give your plant relatively low levels of Nitrogen, especially in the second half of the flowering stage when the plant has stopped growing vegetatively and buds are fattening up. The plant needs a lot of Nitrogen for vegetative growth but doesn’t need nearly as much for making buds. In fact, too much nitrogen in the ripening stage can discourage bud production and hurt your yields.
- Plenty of Phosphorus (P) – Phosphorus is incredibly important to flower production and giving plants plenty of Phosphorus in the flowering stage will help increase the total number of flowers
- Potassium (K) – Potassium is often overlooked compared to Phosphorus (which is often considered a bud booster) but Potassium may actually be even more important! Providing a good source of Potassium increases the size and density of each individual flower.
In general, when it comes to feeding nutrients in the second half of the flowering stage, less is more! Keeping nutrient levels low can also improve the taste of your final buds because high nutrient levels are associated with a chemical taste to the buds.
Giving cannabis the right ratios of nutrients during the flowering stage will greatly increase the quality of your bud!
Supplements in the Flowering Stage
Supplements in the flowering stage come in many different flavors, and they have different goals or purposes
- Sugar or carbohydrates – improve taste/smell and increase bulk. Some of these, like the Botanicare Sweet Carbo Line, not only include sugar, but also certain terpenes and esters that are stored unchanged in plant buds, giving your buds unique subtle flavors like grape, citrus, berry, and “raw” (which is just a generally sweet smell).
- “Bloom Enhancers” – These offer a variety of non-nutrient ingredients that may help the plant grow better or more efficiently in some way by improving processes or providing the plant with amino acids and humic acids, so the plant doesn’t have to make everything itself.
- PK Boosters & “Shooting Powders” – With this type of supplement, the main ingredients are just Phosphorus and Potassium because they are important for flowering. These also sometimes contain some amount of sulfur. In general, use these sparingly as they’re usually very potent! And don’t forget that every quality base Bloom nutrient should already contain plenty of P and K.
Often, bloom supplements will include a mix of some or even all of these types of ingredients! It can definitely get a little confusing so I’ll try to break it down a little 🙂
Sugar or Carbohydrates
A cheap alternative to expensive sugar-based bloom boosting supplements is blackstrap molasses. Giving this to your plants for the last few weeks before harvest can help them get bigger and smell/taste better. It’s not specially made for plants; it’s the regular stuff you’ll find in your kitchen or at the grocery store. Blackstrap molasses adds sugars, amino acids and trace minerals. Unfortunately for hydro growers, anything organic like molasses is not suitable for a hydroponic reservoir! But molasses works great for soil and coco growers 🙂
For last 2-3 weeks before harvest, give 1/2 tsp of Blackstrap Molasses per gallon when watering (for soil or coco coir)
For those who prefer something in a bottle, I’m really intrigued by Botanicare’s Sweet Carbo line. According to Botanicare:
The natural esters in Sweet are easily absorbed by the plant, but are not broken down further once deposited within the plant tissue. This means that as new flowers develop they will contain small amounts of these natural esters which contribute to the overall flavor and aroma of the finished product.
They offer flavors such as grape, citrus, berry, and “raw” (which is just a generally sweet smell). These should be used throughout the flowering stage to help build smell/flavor in the buds as they mature. However, since these contain a small but significant amount of magnesium, they should not be used while flushing during last 2-3 weeks before harvest. At this point, the smells have already been deposited into the buds. Another cool thing about these supplements is they contain amino acids and some other enhancers, so it’s kind of like getting a lot of different products at once.
Other growers who’ve tried the “raw” version have said they can definitely notice an increase in the amount of “sweet” smell in their buds and it’s made me curious/jealous. I plan to use Sweet Grape as my primary supplement for the flowering stage in a future grow; I’ll report back whether buds actually smell like grape, sweet or plain ol’ cannabis 🙂
The jury is still out and which is the most effective supplement, but many growers are happy with bloom promoting supplements that include sources of…
- amino acids
- humic acids
- trace minerals
I personally don’t use this type of supplement so I can’t recommend a particular one, but some of the most popular cannabis supplements based on this type of formula include…
- Floralicious Plus (by General Hydroponics)
- Liquid Karma (by Botanicare)
- Diamond Black (by General Organics)
Note: These are only for soil or coco coir! (Since these supplements contain a lot of organic materials like guano and fishmeal, they are not suitable to hydroponic reservoirs)
PK Boosters & “Shooting Powders”
The supplements listed above use ingredients that add only tiny amounts of base nutrients (NPK). This means that they have less of a chance of overwhelming your plant with too high levels of nutrients (which can be easy to do if you’re adding a lot of supplements!).
However, this last set of nutrients directly adds P and K. If you’re using a regular Bloom nutrient already, this can make it really easy to go overboard with P and K. Whenever using this type of nutrient, a tiny amount goes a really long way! Whenever possible, try to choose a supplement by the same company as your base nutrients – this will help prevent negative interactions between the nutrients and the supplements. In general…
- Phosphorus (P) increases number of flowers
- Potassium (K) increases weight/density of flowers
These sometimes also come with a small amount of Sulfur (S), and possibly other ingredients like amino acids, trace minerals and/or sugar like the supplements above.
Suitable for Hydro, Soil or Coco – Supplements to Increase Yields/Density with extra P & K
- Liquid Koolbloom (by General Hydroponics)
- Hydroplex (by Botanicare)
- Beastie Bloomz (by Fox Farms)
4.) Better Taste, Better Smell – Increase Terpene Content
The smell and scent of cannabis buds are produced by plant chemicals known as “terpenes” (also “terpenoids”, which are a class of terpenes).
Terpenes contribute to the flavors of many household spices (like cinnamon, rosemary, cloves and ginger) and help create the scent of most flowers.
The unique combination of terpenes and terpenoids produced in cannabis flowers (buds) cause most of their taste and smell as well.
There are a variety of ways to increase the terpene content of your buds so you produce cannabis that tastes and smells great, and there are also a couple of common mistakes you should know about that can actually ruin the taste and smell of your buds.
5.) Maintain Proper Temperature and Humidity
Maintain daytime temperatures around 65-80°F (18-26°C) in the flowering stage unless you’re using CO2 which does best at around 80-90°F (26°-32°C). However, even if you’re using CO2, most growers recommend you back off and bring the temps down to 65-80°F for the last two weeks before harvest.
Night temperatures should be kept around 68-75°F (20°-24°C) for most strains. Too-cool temps increase the chances of bud rot, which thrives in the 60°F (15°C) range, and freezing temperatures can actually damage or even kill your plants.
However, if you’re growing a strain that turns color, keep in mind that some of these strains will only show their color when night temperatures are at least a few degrees cooler than during the day in the flowering stage.
Some strains need slightly cooler night temperatures before their buds will turn colors. For example the buds of this Auto Frisian Dew turned bright purple after it started getting below 70°F (21°C) temperatures at night.
Humidity stumps a lot of new growers and causes several unexpected problems.
Maintaining higher humidity during the vegetative stage will reduce salt levels within the plant while encouraging healthy and lush growth.
During the vegetative stage, if humidity drops below 40%, especially anywhere below 25%, it can cause problems that look like nutrient deficiencies or light/heat stress!
But in these cases, just adding a little moisture to the air does wonders, even if you don’t change anything else.
During the flowering stage, your cannabis plants actually prefers less humidity!
Decreasing moisture in the air (lowering the humidity) during the flowering stage helps prevent mold and actually may increase trichome production in your buds! For best results, keep humidity 40%-50% during the flowering stage.
Lower humidity levels in the flowering stage helps promote trichome production, which increases the amount of “glitter” you see on buds
“But I’ve never worried about humidity and my plants are fine…”
The truth is, you can successfully grow your marijuana plants in high or low humidity, even if growth isn’t perfect. This is the primary reason why many growers – especially new ones – forget about humidity altogether.
New growers also tend to hastily spend money on CO2, supplements or expensive nutrients when controlling the humidity in their setup could make a much bigger difference in their final product.
So if you’ve realized that your humidity is far higher or lower than what’s recommended, you may be able to make a simple, relatively cheap change to dramatically improve the vibrancy of your plants.
For growers in really dry or humid areas, it can make a big difference to buy a humidifier/dehumidifier and make sure they’re always providing the optimum humidity levels.
And there’s one more insider trick you need to know about humidity: So you know you need to keep humidity in 40-50%RH range for the flowering stage, but there is one extra trick… Use a dehumidifier to drop the humidity down as low as you possibly can for the last 2-3 weeks of flowering (I’ve gotten the humidity as low as 25%).
This extreme dryness will encourage the buds to seal and protect themselves with additional resin (in other words, a sparkling outer layer of THC-heavy trichomes).
As an added bonus, this trick also gets your buds prepped for a successful, mold-free drying process because your buds have already given up some of their moisture.
6.) Make Sure Grow Room has Strong Air Flow & Good Ventilation
This is yet another factor having to do with air quality (we already listed temperature and humidity).
Over time, any grower (especially indoor growers) will see that great air quality is a big contributor to star-quality buds. Air flow and ventilation are essential if you want to create perfect air quality.
For 1-3 plants smaller to mid-sized plants, you’ll probably be fine with an oscillating fan or two. With a big grow and hot lights, you’ll need a better exhaust system to ensure proper airflow, but it can be easy to set up!
7.) Master the Basics – Especially Drying & Curing
You probably know that in order to get the best results, your plants need to make it through the majority of their lifecycle without major problems.
But although your growing methods are incredibly important, one of the most important things to focus on is when you harvest, as well as the process of drying/curing your buds after harvest.
In fact, the things you do during and after harvest, including drying/curing, makes up almost 50% of your final bud appearance!
Drying/curing the right way will make buds smell better, look better, be more dense, and buds will actually feel more potent!
If you haven’t really been paying attention during the drying/curing part of your grow, you should focus here for the greatest gains in quality!
Drying buds slowly and then curing them in glass mason jars for 2-4+ weeks helps “tighten up” buds so they are more dense. Curing also intensifies smell and increases potency!
What else to pay attention to during the grow?
A lot of mistakes that won’t kill your plant (like nutrient burn, nutrient deficiencies, and heat stress) can often still damage the overall appearance of your buds, especially big problems that happen after the beginning of the flowering stage while buds are in the process of forming.
More importantly, too many problems during the flowering stage can reduce the maximum potency your plant can achieve!
So in order to get the best yields along with beautiful buds that sparkle in the light, you need to gain a complete understanding of the basics of growing. It’s also important to provide your plants with a good growing environment.
But if you were to focus on just ONE thing to improve with your grow, the factor that makes the biggest difference to your quality (besides the strain) is the drying and curing process.
To Sum it Up:
Learn everything you can, start with good genetics and create the perfect growing environment to produce the best buds!
Ever wondered how to grow your own "top-shelf" buds like the ones you get from a dispensary? Learn 7 insider tips to producing your own frosty, medical-quality buds!