marijuana drip system

How to Set Up a Drip Irrigation System for Cannabis (2 Ways)

Drip irrigation might seem expensive or complex to set up, but it doesn’t have to be. In this article, we’ll teach you two ways to instal a drip irrigation system to help you cut down on physical labour and grow bigger, healthier cannabis plants.

Learn how to set up an indoor and outdoor drip irrigation system.


With so much hype and info online about grow lights and nutrients, it’s easy for growers to forget about other aspects of their grow, like irrigation. However, without a healthy, regular watering schedule, your cannabis plants are never going to reach their full potential, regardless of how well you train them or how much money you spend on fertiliser.

In this article, we’ll walk you through drip irrigation, one of the simplest and most effective ways to automate the watering and feeding of your plants. With the right drip irrigation system in place, your plants will grow fast and healthy, without you needing to lift a finger to water or feed them.

How Does Drip Irrigation for Cannabis Work?

Drip irrigation, as the name suggests, is an irrigation system that slowly drip-feeds/waters your plants. It’s a low-pressure and low-volume irrigation technique that automatically delivers nutrients and water directly to a plant’s root zone in a very regulated and precise manner.

This seemingly advanced irrigation technique dates back to ancient China; the Fan Shengzhi shu, a Chinese agricultural text dating back to the 1st century BCE, describes a type of drip irrigation using buried clay pots filled with water.

Today, drip irrigation systems can vary greatly in both price and build quality/sophistication. Some of the most popular styles of drip irrigation include:

Drip Line Irrigation

Drip line irrigation uses lines of tubing to deliver water from your faucets to your garden. These systems usually come with a pressure regulator (to lower the pressure of your water and ensure a slow, steady flow of water), a water filter, and a timer to allow you to automate irrigation.

Bottle Drip Irrigation

Bottle drip irrigation is a very simple yet perfectly effective approach to drip irrigation. It uses plastic bottles placed around your garden, close to your plants’ roots, to deliver a slow, steady flow of water. Rather than investing in a drip line system, you can build your own DIY bottle drip irrigation system for next to nothing (instructions below).

Does Drip Irrigation Save Water?

Yes, drip irrigation can save a lot of water, especially when compared to hand-watering, flood irrigation, or spray/sprinkler systems. Because it delivers water in a very controlled manner directly to the roots of your plants, it greatly reduces the loss of water from evaporation. Also, the flow and direction of water in a drip system isn’t affected by wind as it is in sprinkler systems, meaning it can dramatically improve watering efficiency outdoors.

Advantages of Drip Irrigation

Besides saving water, there are many other benefits to drip irrigation:

  • Reduced fertiliser loss: Because drip irrigation delivers water and nutrients directly to a plant’s root zone, it minimises the waste of fertiliser leaching into areas of the soil where it cannot be absorbed.
  • Reduced labour: Installing a drip irrigation system is super simple and much less labour-intensive when compared to flood irrigation. Plus, drip irrigation also reduces the physical labour it takes to water and feed your plants, as it automates the process.
  • Healthier roots: Drip irrigation systems help optimise the humidity of the soil around your plants’ roots, even in large outdoor gardens or fields. This promotes the development of healthier roots, which is key to healthier plants.
  • Slower soil erosion: If you’re a sustainable outdoor grower, drip irrigation is vital to preserving the quality of your soil over time.
  • Easier weeding: The targeted nature of drip irrigation means it reduces the likelihood of weeds sprouting in your garden.
  • Precise water distribution: Drip irrigation ensures all your plants get the same amount of water, every time you water.
  • Reduced disease and/or pest issues: Drip irrigation waters and feeds your plants right at their root zone without wetting their foliage. This keeps your garden dry, helping to keep moisture-loving pests and pathogens at bay.
  • Lower energy costs: Because drip irrigation is a low-pressure system, it can usually be maintained using less energy.

Disadvantages of Drip Irrigation

Unfortunately, drip irrigation systems also have their drawbacks. First and foremost, they can be more expensive than other irrigation systems, meaning they may not be suited to growers with a limited budget.

Drip irrigation systems also leave a lot of room for error. Installing these systems properly requires a lot of knowledge about your plants, their medium, and the local environment (if you’re growing outdoors). Without this knowledge, you may incorrectly instal or run your system, which might ultimately do your plants more harm than good.

Inexperienced growers using subsurface irrigation systems for the first time, for example, may run into issues with over- or underwatering, which can lead to stunted growth, pest issues, and more.

Some other disadvantages of drip irrigation systems include:

  • Salt build-up around the root zone: Because drip irrigation systems minimise fertiliser leakage, they may facilitate the build-up of salt deposits around the root zone, especially if your fertilisers are highly concentrated.
  • Clogging: Drip irrigation systems are prone to clogging, especially if you run into problems with your water filter. Salts in your fertilisers can also build up in your system, causing it to clog.
  • Plastic leakage: The plastic components of drip systems naturally degrade over time, especially out in the sun. When they do, they may leak chemicals into the water, soil, and surrounding environment.
  • Maintenance costs: Regular maintenance is vital to keeping an irrigation system working properly over time. Hiring a professional to do so, or buying replacement parts and repairing the system yourself, may drive up the cost of your grow-op.

Building Your Own DIY Drip Irrigation System for Growing Cannabis

While professional drip irrigation can be expensive, you can easily craft a makeshift DIY drip system at home. Though there are many different ways to do this, we’ll share two of our favourites; a line irrigation system perfect for an indoor grow room, and an outdoor system made using plastic bottles.

How to Build an Indoor Line Drip Irrigation System

Below, you’ll find a list of materials and instructions for creating a simple line drip irrigation system using basic materials. In our experience, these line systems are the best option for indoor gardeners as they minimise the risk of water splashing up onto your plants, which can create an inviting environment for pests and plagues.

  • A faucet close to your grow room: This will be the source of water for your system.
  • Drip irrigation faucet adapter: This adapter includes a backflow preventer, mesh filter, 25 PSI pressure regulator, and a hose adapter. Rather than buying all these pieces separately, we highly recommend this adapter.
  • ½” (1.27cm) watering line.
  • Water drippers: These pressure compensating drippers are perfect for a DIY drip system.
  • Tent stakes to hold the line in place over your pots.
  • Tubing hole punch
  • Line fittings (optional): This collection of T, cross, and corner fittings might come in handy when trying to run long lines through large grow rooms with multiple plants.
  1. Connect your adapter to your faucet, then connect your watering line to the adapter. Open the faucet to ensure the water flows properly through the adapter to the hose and doesn’t leak.
  2. Connect the end of your line to your faucet and run it into your grow room.
  3. Take some time to visualise the best way to run your line around your room.
  4. Use the hole punch to make holes in your line where necessary. We recommend using at least 2–3 drippers for each plant, placed at equal distances around the pot.
  5. Instal the drippers simply by pushing them into the holes in your line. Make sure the drippers don’t wet any of your plant’s foliage or main stem, as this can attract pests and pathogens into your grow room.
  6. Use tent stakes to hold the line in place close to your plants’ topsoil.
  7. Where necessary, use the T, cross, and corner fittings listed above to neatly run your line through your tent/room. To instal the fittings, simply cut your line where you want the fitting to go, and push it into or over the fitting. You may want to warm the line in hot water first to make this process a little easier.
  8. Once you’re finished running your line, cut it (if need be) and use an end plug to plug it.
  9. Turn on your faucet and check your line. Each dripper should effectively drip water into your plant’s medium. Replace any drippers that spray or appear blocked.

How to Build an Outdoor Bottle Drip Irrigation System

The following instructions are for a simple DIY drip irrigation system using hanging plastic bottles. While it might lack sophistication, this system is super easy to set up and gets the job done for next to no upfront investment in materials/equipment.

  • 2l plastic bottles with bottle caps: You’ll need one bottle for each of your plants.
  • Electric drill for drilling holes into the side of the bottles
  • String to secure the hanging bottles above your plants
  • Scissors or utility knife to cut the bottles
  1. Cut the bottom off your bottles completely. Next, drill two holes into each side of the bottle, roughly 2cm down from where you made the cut.
  2. Run a piece of string from one hole to the other, creating a sling from which you can hang the bottles above your plants.
  3. Screw the caps on each bottle, fill them with water, and hang them roughly 30–60cm from the top of your pots.
  4. Gently unscrew the caps on your bottles to let the water slowly seep out. You may want to experiment with opening and closing the cap to find that sweet spot with a nice, slow, steady drip. Also, make sure your bottles are dripping roughly 5–10cm from the stem of your plants, and ensure they’re not wetting the stem or any foliage to avoid problems with pests and plagues.
  5. Refill your bottles as needed.

Drip Irrigation vs Hand-Watering

Drip irrigation has some major benefits compared to hand-watering or other agricultural irrigation techniques. Unfortunately, one of the main reasons it still isn’t the norm for cannabis growers is its significant upfront cost. However, if you’re a serious grower with a bit of a budget and long-term growing goals, drip irrigation can seriously cut down on the physical labour it takes to run your garden, while helping you grow healthier plants and produce even better harvests.

Want to instal a drip irrigation system in your cannabis garden for healthier, more productive plants? Here are two cost-effective ways to do so.

Drip Irrigation vs. Hand-watering

When it comes to growing cannabis, irrigation tends to get less attention than the flashier aspects like lighting and nutrients. Irrigation is a critical piece of the cannabis cultivation puzzle, but the fact that you can just do it by hand allows people to overlook the benefits — both to the bottom line and to the plants themselves — of installing an irrigation system. After all, hand watering has gotten the job done for decades of clandestine cultivation, so why fix something that isn’t broken?

The answer to that is simple, although proponents of hand-watering may not like it. The fact of the matter is that hand-watering is broken if you’re a commercial cultivator. It costs too much in both time and money and is horribly imprecise. Spending some extra time and money up front to install an irrigation system is not only a surefire way to decrease operating costs in a highly competitive industry, but it will also give growers much finer control over the amount of water and nutrients their plants receive compared to hand-watering.

Boutique growers and home cultivators may prefer handwatering techniques, but commercial facilities can benefi t tremendously from drip irrigation systems. Photo courtesy of Cannabis Irrigation Supply.

Drip Irrigation

There are a number of different types of irrigation systems available to cannabis growers, but in the discussion of maximizing cost savings and efficiency, drip irrigation is really the best solution.

At its heart, drip irrigation is the slow, precise application of water directly to the roots of a plant. Despite it being called “drip” irrigation, this application of water can come in the form of a spray, a mist or the titular “drip-drip-drip” of a standard drip emitter. While traditional sprinklers consume water in gallons per minute, and hydroponics techniques — such as flood and drain — have no flow control to speak of, drip emitters are engineered to emit a specific amount of water, usually measured in gallons per hour. It is this simplicity of concept and precision engineering that allows drip irrigation to offer so many benefits to the cannabis grower.

On the surface, hand-watering seems like a good deal. People need to be out among the plants to keep an eye on them anyway, so why not have them water the plants at the same time? The personal touch of an experienced gardener is a rare commodity that growers are always looking for. Add in the sentiment of “that’s how we’ve always done it” and there’s a powerful — if misguided — case for hand-watering cannabis.

That case begins to break down upon closer inspection, however. Watering plants by hand takes a lot of time, and time has a knack for being the most expensive part of any business. It is true that you need people checking in on the plants, but how much time do they have to give them the TLC they deserve when they spend most of their time mixing nutrients, weighing, watering and reweighing? The larger an operation grows, the less time its employees have to nurture the plants. Paying people to water by hand costs increasingly more money as an operation grows. This is doubly true when it comes to experienced growers. Not only do they cost more to employ, but their skills could also be put to better use than ferrying water from one place to another.

Charles Johnson, chief operating officer of Truly Oreganic, a cultivator in Oregon, said he was extremely happy with the shift from hand-watering to an automated system.

“It has turned a four-hour job into 20 minutes,” Johnson said. “The drip system waters all plants exactly the same, no matter what location in the system.”

Truly Oreganic, a state-licensed cultivator in Oregon, collects rainwater and feeds its plants with a drip irrigation system. Photo courtesy of Truly Oreganic.

The Precision of Automation

In a perfect world, an employee may be able to water plants and have time left to sing “Stairway to Heaven” to all the mothers as they coax them toward their grid of artificial suns, but anyone who has grown cannabis knows that we don’t live in a perfect world. Cultivation involves rolling with a never-ending series of punches. The already time-consuming process of hand-watering is exacerbated by heavy plants, unruly growing media (such as expanded clay balls) and crowded grow rooms that restrict maneuverability. The amount of nutrients and water delivered to each plant is largely at the whims of the employee doing the watering, and this imprecision can breed time-consuming problems of its own, such as nursing over- or under-watered plants back to health.

Replacing your watering brigade with a drip irrigation system solves many of these problems outright. Installation of a properly-designed drip system can be done quickly by a trained professional, or slightly slower by a complete novice. Think of it like Legos: all the pieces may look intimidating when strewn across the floor, but with a little explanation and some sorting, everything logically clicks together (just make sure you don’t step on them with bare feet). Enlisting professionals during the design phase is a must, though, as badly designed systems are the stuff of nightmares.

Drip irrigation systems are also extremely precise and, with the proper automation system, they can be reliably turned on for as little as one second at a time, dozens of times per day. This allows growers to measure the nutrients and water each plant receives down to the milliliter. That’s not to say that an experienced grower can’t do this by hand, but an automated drip irrigation system will do it all by itself, without an hourly paycheck.

Up-front costs

You may be reading this and thinking, “this all sounds really expensive,” and you wouldn’t be wrong. Many products made for the cannabis industry have an inflated price tag due to the history and risk associated with the plant. Drip irrigation systems as we know them today have been around since the mid-1960s and thus avoid the typical markup associated with cannabis-specific products.

It is not uncommon for a drip system to cost $1 per plant, including basic automation. Integrated nutrient injection and soil monitoring are more expensive, but for grows large enough to merit those technologies, the cost-per-plant still remains low. The cost for these systems is all up-front, unlike the ongoing costs associated with retaining employees to hand-water plants, allowing businesses to amortize the cost across the whole life of their system. Considering that many drip irrigation products are designed to operate in outdoor, agricultural settings for upwards of 20 years, that cost could be amortized for quite a while.

While irrigation may be the most boring aspect of a grow facility, it is essential to making an operation profitable. The cannabis industry is steeped in decades of myth and tradition, and while that’s one of the things that makes it fun to work in, it can also hamper the adoption of important technologies. Your dad and your dad’s dad may have watered their weed by hand, but commercial facilities ain’t your daddy’s grow op. For anyone looking to succeed at large-scale cannabis cultivation, a proper irrigation system is a must. Your bottom line — and your back! — will thank you.

Drip Irrigation vs. Hand-watering When it comes to growing cannabis, irrigation tends to get less attention than the flashier aspects like lighting and nutrients. Irrigation is a critical piece