Categories
BLOG

soaking cannabis seeds

How to Germinate Weed Seeds – Tips and Methods

Inicio » Crop articles » How to Germinate Weed Seeds – Tips and Methods

Germinating cannabis seeds isn’t a complicated process, although it does require a few specific parameters in order to happen successfully. If you’re reading up on how to germinate weed seeds, you’re in the right place; it’s a relatively easy process, you just need to have some patience on hand. The first thing to keep in mind is that your seeds are going to need water, heat and air in order to germinate.

How to Germinate Weed Seeds – Basic Parameters

Water (moisture)

Moisture is one of the three elements required to successfully germinate cannabis seeds; it essentially helps the seeds to expand and therefore break their shell. Over-watering at this stage can be fatal for your seeds, although harder-shelled and older seeds can take longer to soak through, so some patience is required.

Heat

This can be the hardest thing to work with, because temperatures that are either too cold or too hot will mess with your seeds and they won’t germinate. Springtime temperatures are generally what you should be aiming for – seeds can still germinate in colder temperatures, although they can take longer.

How to Germinate Weed Seeds – Germination Methods

There are many different germination methods that growers tend to use, all of which involve water and heat, although they’re not all as effective as others. Some people prefer germinating by planting straight in the ground, using starter cubes or by letting them soak overnight, although our preferred and recommended method is the paper towel method using either plates or an opaque kitchen container. We’re going to give you a brief rundown of the other methods, alongside their pros and cons.

Starter Cubes

This method is more reliable than others, and they make germinating quite easy. All you have to do is place your seed carefully in your seed plug and follow the instructions when watering; different brands and models have different watering instructions.

Some cubes are made out of peat and soil, and you can move them straight into your flowerpot once they’ve popped. However, hydroponic growers can use rockwool cubes which can hold quite a lot of moisture.

One of the downsides to using starter cubes is that they’re not very handy if you only want to germinate one or two seeds, because they’re usually sold in packs of 50 or more, and once they’ve been opened most cubes tend to dry out within a couple of weeks. Another downside to Rockwool specific cubes is that they’re bad for the environment, can be bad for your health when inhaled, and they’re not the best method for new growers.

Direct Planting

Other growers prefer to get rid of the middle man and plant their seed straight into their first flowerpot – it’s essentially how it would be done in nature, so why not follow the natural order? One of the pros when it comes to planting straight in your growing medium is that you don’t have to stress out your little seedling when transplanting, although it can be a bit harder to get the humidity right and you need to bury it just the right amount so that it can sprout.

Overnight Soaking

We highly advise against using this method, as it’s incredibly easy to accidentally drown your seeds. This method involves soaking your seeds in a glass of lukewarm water – it can be any type of cup, although people usually use a normal glass. This method can be effective for much older seeds or for seeds that have abnormally thick shells.

There are a few myths surrounding germinating in water overnight – some people say that if your seeds sink, they won’t germinate, however the truth is that most seeds start off by floating and then as they soak, they sink to the bottom of the glass. This has nothing to do with germination indication.

How to Germinate Weed Seeds – Paper Towel Method

This method is the method we recommend all readers and customers use, as it’s the one that has proven to give us the highest germination rate. We’re going to give an in-depth step by step guide on how to use this method. Keep in mind that you can skip the rooting hormone part if you prefer all natural results, although X-Seed does provide impressive results to start with.

Material Needed to Successfully Germinate seeds

  • Kitchen paper
  • Opaque plastic Tupperware or two plates
  • X-Seed by B.A.C.
  • Viable cannabis seeds

We’re going to go through the X-Seed method – if you want to skip this, you can simply skip the steps involving X-Seed and place your seeds straight into your paper towel as stated in step 4. Before you start, make sure you have everything you need at hand, so that you don’t have to waste any time looking for stuff.

Step 1: Soak the seeds

Submerge your seeds in your B.A.C. X-Seed liquid for an hour. Give it a stir every now and then so that the seeds are thoroughly soaked.

Step 2: Germination

While your seeds are soaking, you’ll need to prepare your paper towel and plates (or opaque Tupperware). Make a makeshift “bed” on the bottom plate with damp kitchen paper, but make sure it isn’t soaking. We tend to use 3 layers of kitchen paper; wet the paper and let it dry without wrinkling it, hanging it out kind of like a t-shirt so that all of the excess water can easily drain out. No need to worry about drying it, as you want the kitchen paper to be damp.

Step 3: Separation

After your seeds have been in the B.A.C. X-Seed liquid for an hour, by using a spoon you can carefully extract the seeds from the liquid and spread them evenly across the bottom of your plate or container. An even spread is important, so as the roots of each seed do not get tangled – about an inch apart is good.

Step 4: Cover the seeds

Once you have all of your seeds nicely placed on your plate or in your container, cover the seeds with another layer of damp kitchen paper, similar to the first layer that you put on the bottom. At this point, your seeds should be completely covered.

Step 5: Take care

Once you’ve finished covering your seeds with paper towel, cover them with another plate or put the lid on your container; if doing this in a container, the paper shouldn’t dry out as fast. A mistake made by many growers is that they add too much water to their paper towels if they’ve dried up, but by using a spray bottle you can moisten it some more without overdoing it. If your container is transparent, all you have to do is line the inside so that absolutely no light can get in.

Step 6: Temperature adjustments

Once you’ve isolated your seeds from light, you should leave it somewhere with a nice, neutral temperature. During winter it’s often harder to find a good spot, so you should try and find a heat source that isn’t excessive. You can use a computer modem, or even a softly powered electric blanket. Items like play-stations can get too hot and could end up cooking your seeds, so take care where you put them.

Step 7: After care

Once your seeds have opened up they’ll shoot out a small, white root. This means you need to be extremely careful when handling them. Don’t leave them for long because once they’re open they should be moved to soil.

Step 8: Moving to soil

Now that your seeds have officially germinated, you need to move them to the medium in which they will remain for the rest of the growing process. Germinated seeds are generally moved to soil, but they can also be planted in rockwool for hydro growing, or in a coco jiffy if you want to cultivate in coco coir. In this article we’ll be dealing with the most common method: planting seeds in soil.

How to Germinate Weed Seeds

Start by filling a small pot with soil, no more than half a liter. Water it before even thinking about planting your seed. Once the soil is damp enough to weigh down the plant pot, use the tip of your finger to create a small 0.5-0.1cm hole in the middle of the soil, and deposit the seed in the hole with the root facing downwards. Then, cover the seed with a little soil so that it’s just under the surface. The last step in this process is to put your plant pot in the sun or under your lamps (wherever you’re planning on growing it). Within a couple of days you should see that first sprout, that will keep on growing right until the end. In some cases, it may even take a matter of hours.

Keep an eye out on our follow up article on soil preparation for growing cannabis.

Figuring out how to germinate weed seeds isn't that hard, but choosing the right method can determine exactly how high your success rate is.

The complete guide to germinating cannabis seeds

Before you can be met with bountiful hauls of dank buds, there are several stages of cannabis growing that take precedence. Unless you can successfully germinate cannabis seeds, you won’t have a plant to harvest. Give your seeds the best possible start in life by reading our definitive guide to germination.

Contents:

THE ART OF GERMINATING CANNABIS SEEDS

Often overlooked, it is all too easy to assume that the vegetative and flowering stages of cannabis growth are the most critical parts of the plant’s life cycle. However, with the chance of failure high unless you know what you’re doing, poor planning when it comes to germination can make or break your next grow. Giving your cannabis seeds the best possible start on their journey to bulging buds is a surefire way to encourage a healthy and robust plant.

Small, fragile, and in desperate need of a helping hand, there are several ways you can germinate your cannabis seeds. All methods have varying degrees of success, with both advantages and disadvantages. It is important to note that even with advanced growing expertise and top-of-the-line equipment, you may still end up with a few failed seeds. This is a natural part of dealing with a living organism. At Royal Queen seeds, we only sell feminized cannabis seeds, so there is no need to worry about removing male plants.

WHAT TO LOOK OUT FOR IN CANNABIS SEEDS

Regardless of where you get your seeds from, it is best to give them a slight (and delicate) inspection before planting. Most of the time, all seeds will germinate; however, poor-quality seeds will produce a weaker plant. Unfortunately, that is something you will not find out until well into the vegetative and flowering stages.

To avoid disappointment, seeds that have a darker colouration stand a better chance of germinating, while pale green or white seeds are likely to fail. Even if dark seeds look slightly damaged, they should be planted anyway. There is a good chance they will still germinate, even if the outer shell is somewhat crushed.

GERMINATION TEMPERATURE PLAYS A CRUCIAL ROLE

Before we jump straight into the germination methods, there are a couple of germination golden rules. For the best results, we recommend staying within these guidelines, no matter how you choose to germinate. That being said, of all the factors to consider, temperature is one of the most critical. Seeds will always seek out even the smallest amount of moisture, but they use temperature as a sign that they need to do so.

• The ideal temperature is between 22° and 25°C (71–77°F)
• Your growing environment should be damp/moist, but never wet
• Relative humidity range should be between 70% and 90%
• Seeds favour fluorescent lighting (Cool White code 33)
• Minimise the amount of seed handling you do
• In hydroponic/rockwool plugs, the ideal PH value is 5.8–6.2

WHAT IS AN EXPECTED GERMINATION TIME?

Three fundamental principles will trigger that first small taproot to appear: warmth, moisture, and darkness. With the promise of moisture, a single root will take shape before slowly developing into the cannabis plant we know and love. In the right conditions, seeds will begin to develop within 12–36 hours of moisture being introduced to them.

Timescales can vary, as it all depends on how ideal your germination environment is (see the golden rules above). Even the worst grower could make a seed germinate, but it may take a few weeks and, of course, increases the risk of a weaker plant.

CHOOSING YOUR GERMINATION METHOD

GLASS OF WATER APPROACH

Arguably one of the least effective methods, but it is still viable. Incredibly simple to facilitate, beginner growers may opt to germinate their seeds in a glass of water. Half-fill a glass or bowl with water that is approximately 22°C (71°F).

After 3–5 days, the seeds will start to open, and you should see tiny white tips appear. Once these roots reach 2–3mm in length, use extreme care to transfer them from the water to pre-prepared soil pots.

The soil pots will need small holes (roughly 10–15mm deep) for the newly germinated seeds to be placed into. Once the seeds are secure, you will want to place a fluorescent light 13–15cm (5–6 inches) away to encourage growth. Finally, don’t risk overwatering your seeds at this early stage. Use a plant mister to make sure they stay damp but not soaking wet.

WET KITCHEN TOWEL METHOD

Probably one of the most common methods of germination. The kitchen towel method comes in several iterations. Some growers use cotton wool pads or absorbent pieces of paper. For this guide, we will be using kitchen towel as it is readily available and holds moisture relatively well.

Place one sheet of damp kitchen towel on a flat surface. Space your seeds a few centimetres apart before placing the second piece of kitchen towel over the top. You need to ensure both pieces are damp, not wet. Once again, when the white root tips reach 2–3mm, move the seeds (carefully) to soil pots. Use the same guidance found above for planting techniques.

PLANTING DIRECTLY INTO SOIL

Planting directly into your growing medium prevents having to move seeds when they are at their most fragile. That first root tip is covered with microscopic filaments that are easily damaged. Given that both a cup full of water and moist paper towels are more prone to temperature fluctuations from their environment, planting in soil is a much safer option.

Start by filling pots with a premium-quality soil that has been soaked in water. Many growers also choose to lace the water with a root stimulator. Make a hole roughly 10–15mm deep. This will be your seed’s new home. Remove the seeds from their packet and place them into the pre-dug holes. Loosely cover the seeds, but be careful not to compress the soil above the seed too much. The root will struggle to penetrate solid soil, slowing plant growth. Lightly spray the top of where you placed the seed so that your growing medium stays moist.

If you don’t like the idea of pre-soaking your soil, you can use a spray to moisten the holes before you plant each seed. With enough moisture surrounding your seeds, you can still encourage a root to develop.

Your growing pots will need to be placed in a damp climate that is within the temperature range listed under our golden rules. After 4–10 days, you should see a young seedling sprout, while the roots will have begun to develop underneath the soil. The entire plant and its soil can now be transferred to a larger pot, where normal growing routines should start.

USING STONE WOOL BLOCKS

Maintaining the ideal temperature (between 22–25°C/71–77°F) and moisture for germination is tricky. Leaving seeds out in the open environment or on a windowsill is far from ideal; a DIY climate-controlled cupboard would do a much better service. A warming mat is perfect for maintaining a constant temperature, but it doesn’t tackle the issue of moisture.

You will need to invest in a few pieces of unique equipment, but by using stone wool blocks, you can create a perfect utopia for germinating cannabis seeds. Soak the stone wool blocks in the same way you would a soil medium. The wool will retain the moisture and prevent the need to water during the early stages of germination. After the wool blocks are soaked, stick them in a plastic tray that also has a lid. Large cake tubs are ideal.

The dome of the plastic container will create your seeds’ own mini tropical climate. If you then place all the components in a temperature-controlled cupboard, you will have created a self-perpetuating supply of moisture—no need to touch the seeds again until they are ready to be transferred to your final growing medium as a young seedling. Using the stone wool block method, your seeds should germinate in one to two days.

Two or three weeks after germination, your young seedlings should be ready for their new home. At this point you have two options; transplanting them into soil pots, or taking on the challenge of hydroponics. You’ll know when the seedlings are ready to be moved because the root system should start to poke out of the bottom of the wool blocks. As long as the roots haven’t begun to engulf the bottom half of the wool block, they will seek out water and nutrients in their new surroundings and continue to grow downwards.

ROYAL QUEEN SEEDS FEMINIZED STARTER KIT

There is, of course, a far simpler way to germinate seeds. Ideal for beginners, the feminized starter kit by Royal Queen Seeds has everything you need to kick-start your next cannabis project.

The Royal Queen Seeds Feminized Starter Kit contains:

  • 3x RQS Critical feminized seeds
  • 20x Easy-Start seedling pots
  • 1x Propagator Pro
  • 1x pack of Bacto
  • 1x perlite
  • 1x fluorescent lights
  • 1x instruction manual
  • 4x AA batteries
  • 1x Royal Queen Seeds catalogue

*You will also need a measuring cup and a stirrer (not included in the kit).

1. Gently remove the foil from the back of the seed packet and place them carefully into a dry container.

2. You will need a shallow container that is large enough to accommodate the seed tray. Fill the container with one litre of lukewarm water (22–25°C/71–77°F). Pour in the packet of Bacto enzyme, allowing it to dissolve before setting the seed tray into the container to soak. The seed tray only needs to be immersed for 5–10 seconds. Do not discard the Bacto mixture after the seed tray has been soaked.

3. After removing the seed tray from your shallow container, poke a 10–15mm deep hole into the soil of each pot, and delicately transfer your seeds from their dry container into each hole. Remember, one seed per pot.

4. Using the supplied propagator, sprinkle a 15mm-thick layer of perlite into the bottom of the tray.

5. Place your seed tray into the propagator, adjust the walls, and position the lid. The lid comes with an on/off switch for the already-attached lights.

6. Check the water level in your reservoir once a day. Your aim is to maintain an even level. After 1–7 days, the seeds should have sprouted, with visible leaves appearing. Once the seedling is 3mm tall, transfer it to your final growing medium.

IF IN DOUBT, THINK SPRINGTIME CONDITIONS

No matter which method you choose, always think about what conditions would naturally be like in spring. In their natural environment, cannabis seeds would start to sprout in-line with the seasonal change from winter to spring. Moisture is still high, and temperatures will be naturally rising. Always ask yourself the question, “Does my germination setup replicate spring conditions”. If the answer is yes, there is a good chance germination will be a success.

GIVING YOUR SEEDS THE BEST POSSIBLE START IN LIFE

In most cases, germination will go off without a hitch. However, there are a few troubleshooting issues we can help with.

LIGHTING

The first is lighting. Your seed/young seedling will only need fluorescent or CFL grow lights, at least to begin with. While plants need light to thrive, too much of a good thing will damage cannabis in its first few weeks.

Position lights about 15cm from seeds. Once your seedling has developed its first proper leaves (they will have jagged edges), you can move the lights as close as 5cm. If you are concerned about damaging your seedling, place your hand between the leaves and your lights. If you cannot hold your hand in place for ten seconds without it being too hot, move the lights 2cm away. Repeat until you are comfortable with the temperature.

As young seedlings grow quite quickly, you will need to keep adjusting lights to get the best results. After two weeks under fluorescent lights, you will be able to switch to high-powered HPS or MH-style grow lights.

UPSIDE-DOWN SEEDS

Don’t panic, where possible roots will always grow downwards. It is not necessary to try and reposition the seed yourself. Disturbing the seed at this crucial time will do more damage than good. In most scenarios, what you are actually seeing is not a root protruding from the top of the seed, but the stem of a cannabis plant.

If you are ever unsure, always wait a few days for the first leaves (cotyledons) to appear. As long as a seed’s requirements have been met, the seedling should sort itself out. The best approach is not to panic; follow the golden rules and your young seedling will be ready to transfer to a larger pot in no time.

GERMINATION AND BEYOND

WHEN DO YOU START FEEDING?

It will depend on the growing medium you are using, but in most cases, you will not need to supply any nutrients for the first 2–3 weeks. There will be of plenty of nutrients available in the soil, and even coco will only need nutrients added after a week or so. If you do opt for coco or hydroponics, nutrients should be added at 0.25x their regular strength. Once the first set of leaves appear, increase this in increments of 0.25 per set of leaves. For beginners, we would always recommend using a soil medium. It allows you to get to know the intricacies of growing cannabis more efficiently, and can be the least punishing if you make mistakes.

An easy way to spot if more nutrients are needed is to observe the leaves. The serrated leaves will start to turn pale green as nutrient stores are depleted. Left long enough, leaves will eventually turn yellow. This is a definite sign that more nutrients are needed. Your plant will not die if the leaves turn yellow, but it is a timely reminder to feed your young seedling.

Nitrogen is the most commonly needed nutrient during periods of high growth. Once the seedling has been fed, the colour of the leaves will return to normal. Depending on how long you waited to take action, this can take a few hours or a whole day.

SIT BACK AND RELAX

The first few weeks of a seedling’s development require very little interference. Nutrients, as we have mentioned, will need minor tweaks, as will lighting. However, now that your seed has germinated, you have a few weeks of grace. Sit back, relax, and enjoy your cannabis plant taking shape.

Once those initial weeks have passed, you can treat your seedling like it is in the vegetative stage, and switch to strict lighting routines and full-intensity light. During germination, always remember the golden rules, and if in doubt, ask yourself if you have created “springtime conditions”. If you are confident everything is on track, all you need to do is observe and marvel at the creation of your very own cannabis plant.

Royal Queen Seeds Produces Some Of Europe’s Best Cannabis Seeds, Ensuring Hobby Growers Everywhere Have Access To The Finest Marijuana Strains Around.

Royal Queen Seeds Produces Some Of Europe’s Best Cannabis Seeds, Ensuring Hobby Growers Everywhere Have Access To The Finest Marijuana Strains Around.

Part. 2: The Vegetative Phase. The germinated seeds peak out above ground and immediately spring up.

Part. 3: The Cannabis Blooming Phase. Just another couple of months of blossoming we will be ready to get our sheers out of the cupboard.

Part. 4: The last weeks of flowering stage. After weeks of mounting excitement the long-awaited moment the harvest is finally within arm’s reach.

Part. 5: Harvest Time. Learn every step of the cannabis harvest and post-harvest process.

Time then to whip out our packages of seeds and get to work. But how do you best set to work, to get these tiny, fragile seeds to grow without problems into small plants?