Turfgrass selection involves choosing a grass adapted to the environmental conditions of Oklahoma and that fits your personal needs and interests. The grass should also be suited to the physical or environmental limitations of the planting site, such as shade, no supplemental water, or poor soil conditions.
Bermudagrass, buffalograss, and zoysiagrass are the Warm Season (grows in the summer and dormant in the winter) turfgrass species most commonly planted in Oklahoma.
Occasionally, Cool Season turfgrass species, such as tall fescue, Kentucky bluegrass, and perennial ryegrass are planted on shaded sites because the Warm Season turfgrasses cannot tolerate shade. These grasses also can be utilized in the full sun, but only when a convenient means of irrigation is available. Choosing the right cool-season turfgrass cultivar is essential for its success during the hot, dry summers of Oklahoma.
Bermuda’s First Mowing of the Season
A common practice for bermuda grass owners is to leave bermuda grass tall in the fall to help protect the plant from cold winters. This leaves a a large mass of dead grass blades to contend with during the early days of spring when all we want to see is green. To speed up the process scalping the lawn on the first mowing seemed like a harmless kick-start for spring. The thinking was that by removing so much of the dormant grass blades promoted early green up of bermuda by allowing the sun to warm up the soil faster, and thus the lawn greens up faster.
In theory this is true, but in actual practice it may do more harm than good. In many cases bermuda grass has often already started to green up, but hasn’t become noticeable yet. Scalping the lawn on that first mowing actually damages this new growth at the base of the plant. A better, safer practice is to remove no more than 1/2 of the dead plant. This will protect that sensitive new growth zone, yet still allow the soil to start warming a little faster.
After the first mowing, never remove more than 1/3 of the grass blade with any one mowing.
Got Winter Damage to Bermuda?
Oklahoma is right on the northern border for growing Bermuda and in those years with exceptionally cold winters, there will be damage, even winter kill to bermudagrass lawns.
Determining if the bermuda was damaged or killed takes time to assess. Damaged or killed spots may just fill in. But if the dead areas are sizeable, the areas will need fresh sod.
Zoysia’s First Mowing of the Season
Follow the same advice for bermuda. Although zoysia’s leaves do turn brown in the fall, and waits for soil temperatures to warm, it does not actually go dormant for the entire winter. Scalping it can do severe damage to the plant and should be avoided.
Oklahoma Lawns Turfgrass selection involves choosing a grass adapted to the environmental conditions of Oklahoma and that fits your personal needs and interests. The grass should also be suited
Oklahoma State University Turfgrass Science
Programs & Services
Field Research Units
Faculty & Staff
Oklahoma State University Turfgrass Science
Oklahoma State University Turfgrass Science
Controlling Weeds in Home Lawns
Weeds are the most common pest in turfgrass areas. They destroy the appearance of our turf and weaken it by stealing space, nutrients, water, and light. Chemical weed killers (herbicides) are effective tools for controlling weeds in turfgrass, but repeated occurrence of weeds may reflect underlying problems of turfgrasses that are not correctable with herbicides. Frequently, weeds germinate and become established when the turf coverage is thin or broken due to some environmental condition, such as excessive drought or winter injury, uncontrolled insect or disease infestations, and/ or improper maintenance activities. Thus, the most important step in controlling weeds in turfgrass is a management program that produces a dense, vigorous, healthy turf. This can only be accomplished by growing a turfgrass variety adapted to your conditions and by properly mowing, watering, and fertilizing. For complete information on correctly caring for your lawn, see Fact Sheet F-6420 Lawn Management in Oklahoma. The information below was prepared to describe how to effectively control weeds with herbicides.(back to top)
Identifying weeds is the first step in effective herbicide control. Most herbicides control only certain kinds of weeds, so identifying your weed problem is critical in selecting the appropriate herbicide. You may not be able to positively identify your weeds, but distinguishing whether they are grassy or broadleaf will frequently be sufficient information for selecting the right herbicide. All grassy weeds have long, narrow leaves with straight veins running parallel the full length of the leaf. Broadleaf weeds have broader leaves with veins arranged in a branching or net-like pattern.
Identifying your weed problem also will help you in knowing the life cycle of weeds and the stage of growth in which they are most susceptible to herbicides. Applying postemergence herbicides on weeds in the correct stage of growth is just as critical as identifying the weed and choosing the right herbicide: emerged summer weeds are most effectively controlled in May and June and emerged winter weeds are most effectively controlled in October and November. Annual weeds complete their life cycle in one growing season. They come back each year from seed. There are annual weeds that grow in the summer and produce seeds in the fall, and there are annual weeds that grow in the winter and produce seeds in late spring or early summer.
Summer Annual weeds
Summer annual weeds germinate in the spring and typically die with the first hard frost in the fall. Examples of commonly found summer annual grassy weeds include crabgrass, foxtails, goosegrass, and sandbur. Crabgrass and foxtails are consistently controlled in all established turfgrasses by applications of preemergence herbicides by March 15 to April 1. Most summer annual grassy weeds can be safely controlled in established bermudagrass, buffalograss, and Kentucky bluegrass by applications of organic arsenicals (AMA, DSMA, MSMA, etc.) soon after their emergence in May and June.
Examples of commonly found summer annual broadleaf weeds include asters, carpetweed, knotweed, puncture vine, common purslane, and spotted spurge. Most summer annual broadleaf weeds can be safely controlled in established bermudagrass, Kentucky bluegrass, centipedegrass, perennial ryegrass, tall fescue, and zoysiagrass by applications of 2,4-D, Banvel (dicamba), MCPP (mecoprop) combinations (Trex-San, Trimec, 33-Plus, etc.) soon after their emergence in May and June.
Winter Annual weeds
Winter annual weeds germinate in late September and October and die the following summer. Examples of commonly found winter annual grassy weeds include annual bluegrass, cheat, downy brome, little barley, and rescuegrass. Annual bluegrass is consistently controlled in all established turfgrasses by applications of preemergence herbicides by September 15. Most winter annual grassy weeds also can be controlled in established bermudagrass by applications of Kerb (pronamide) soon after their emergence in October and November. Annual bluegrass and other winter annual weeds also can be controlled in established dormant bermudagrass by applications of Roundup (glyphosate) in December and January.
Examples of commonly found winter annual broadleaf weeds include chickweed, dwarf fleabane, and henbit. Most winter annual broadleaf weeds can be safely controlled in established bermudagrass, Kentucky bluegrass, centipedegrass, perennial ryograss, tall fescue, and zoysiagrass by applications of 2,4-D, Banvel, MCPP combinations (Trex-San, Trimec, 33-Plus, etc.) soon after their emergence in October and November.
Perennial weeds have the capacity to reproduce by seeds and underground plant parts such as rhizomes, nutlets, and bulbs. Generally, perennial weeds are more difficult to control than annual weeds because of their ability to “come back” from underground plant parts. Clovers, curly dock, dandelion, plantains, spring beauty, wild garlic, and woodsorrel are examples of perennial broadleaf weeds. These weeds are most effectively controlled in established bermudagrass, Kentucky bluegrass, centipedegrass, perennial ryograss, tall fescue, and zoysiagrass by applications of 2,4-D, Banvel, MCPP combinations when weeds are young and actively growing. Dallisgrass is a perennial grassy weed and yellow nutsedge (nutgrass) is a perennial grass-like weed. Control Dallisgrass in established bermudagrass, buffalograss, and Kentucky bluegrass by applications of organic arsenicals (AMA, DSMA, MSMA, etc.) in May and June. Control yellow nutsedge in May and June with applications of organic arsenicals or Basagran (bentazon). Applications of Basagran are safe on established bermudagrass, bluegrass, centipedegrass, fescue, ryegrass, and St. Augustinegrass.
One method of classifying herbicides is by the stage of growth the weed is in when the herbicide is applied. Preemergence herbicides were designed to control weeds as they germinate in the soil, before they emerge in the turf. Postemergence herbicides are applied after weeds emerge, preferably while they are young and actively growing.
Most preemergence herbicides give effective control of crabgrass, foxtails, annual bluegrass, and chickweed. A few other grassy and broadleaf weeds are controlled with specific preemergence herbicides. Some preemergence herbicides include Dacthal (DCPA), Balan (benefin), Betasan (bensulide), Princep (simazine), Purge (atrazine), Surflan (oryzalin), Kerb (pronamide), Devrinol (napropamide), and various herbicide and fertilizer combinations, formulated for the home owner. See Extension Fact Sheet F-6423 Controlling Grassy Weeds in Home Lawns, for more information.
Correctly applying preemergence herbicides is just as important as knowing which weeds they control. The proper steps to ensure successful weed control with preemergence herbicides are listed below.
1. TIMING Most preemergence herbicides will not control weeds that have germinated prior to application.
Therefore, try to apply these herbicides several weeks before germination. If they are applied too soon before germination, the herbicide may lose its effectiveness too early in the season. Apply preemergence herbicides by March 15 to April 1 for the control of crabgrass and foxtails and by September 15 for the control of annual bluegrass and chickweed. Specific dates for applications of preemergence herbicides are difficult to give due to varying environmental conditions for each location and year. Normally, crabgrass does not germinate in the spring before Redbud is past full bloom.
2. TURF PREPARATION To ensure the preemergence herbicide of getting into the soil where weed seed is located, remove excessive layers (thicker than 0.5 inch) of thatch, and also remove debris such as leaves and cuttings before you apply the herbicide.
3. AMOUNT Always read the label and apply the recommended amount on your lawn. Check the label to see that the herbicide is safe for use on your lawn. For example, never apply Kerb, Princep (simazine), Purge (atrazine), or Surflan on cool-season turfgrasses.
4. COVERAGE Achieve a complete, uniform coverage by dividing the recommended amount of granular herbicide into two equal portions and spreading each in opposite directions. For adequate coverage, make spray applications at approximately 30 gallons per acre or approximately 3 quarts per 1000 ft2.
5. ACTIVATION Water in the preemergence herbicide if 0.5 inch of rain does not occur within 24 to 48 hours following application. All preemergence herbicides are soil applied and must be washed into the soil where weed seeds are located.
6. SECOND APPLICATION A second application may be required for season-long control. This will depend on the particular herbicide and environmental conditions, but preemergence herbicides generally remain effective for 60 to 110 days.
7. USE DURING ESTABLISHMENT Most preemergence herbicides will stunt above-ground stems and reduce rooting of seedings, sod, plugs, or sprigs. However, preliminary research indicates that Ronstar can be safely applied on newly sodded, plugged, or sprigged common type bermudagrass lawns. Do not apply preemergence herbicides after July 1 in areas that will be overseeded with perennial ryegrass in September.
Postemergence herbicides are effective for grassy and broadleaf weed control. All postemergence herbicides are termed either selective or non-selective. Selective postemergence herbicides control certain weeds without injury to desirable turfgrasses when applied according to label instructions. Examples of selective postemergence herbicides include the organic arsenicals (DSMA, MSMA, AMA, etc.), 2,4-D, Banvel, and MCPP. Non-selective postemergence herbicides kill or injure most green, actively growing plants. Examples of non-selective postemergence herbicides include Roundup and Ortho Diquat Herbicide H/A (diquat).
All postemergence herbicides also can be termed either systemic or contact. Systemic postemergence herbicides are absorbed by plants and translocated to all plant parts, including underground bulbs, nutlets, and rhizomes. Perennial weeds, with underground plant parts, are most effectively controlled with systemic postemergence herbicides. Examples of systemic postemergence herbicides include 2,4-D, Banvel, and MCPP. The organic arsenicals are slightly systemic. The contact herbicides kill or injure only those plant parts they directly contact. Small annual weeds can be controlled with contact herbicides. Examples of contact herbicides include Diquat and Phytar 560 (cacodylic acid).
Postemergence herbicides are generally foliar applied and absorbed, so they must remain on the leaf surface for 24 to 48 hours following application for adequate absorption. Do not mow several days before or after herbicide application to ensure satisfactory leaf area. Generally, the addition of surfactants (spreader-sticker) to spray solutions of herbicide products that do not contain them will aid in the herbicide solution covering and adhering to the foliage. For adequate coverage, make spray applications at 3 quarts to 1 gallon per 1000 ft 2 or 30 to 40 gallons per acre.
Granular postemergence herbicides must also remain on the leaf surface. Apply these herbicides when the foliage is wet, such as in the morning, to increase the adherence of the granules to the foliage as an aid to herbicide absorption. Achieve a complete, uniform coverage by dividing the recommended amount of granular herbicide into two equal portions and spreading each in opposite directions.
2,4-D, Banvel (dicamba), MCPP (mecoprop).
These postemergence herbicides, which are selective and systemic, are used for the control of most winter and summer broadleaf weeds in turf. To increase the number of different kinds of weeds they control, many broadleaf weed killers are a mixture of these herbicides. These herbicides are safe on established bermudagrass, Kentucky bluegrass, centipedegrass, tall fescue, perennial ryegrass, and zoysiagrass.
Two related chemicals are 2,4-D and MCPP. Both are relatively immobile in the soil and pose little threat to nearby trees and shrubs from root absorption. Most chemical residue in the soil is dissipated in three to four weeks. However, shrubs, trees, and vegetables can be damaged by drifting vapors or spray from 2,4-D, so use caution when spraying them around susceptible plants and choose a time when the wind is minimal. The amine salts are safest around susceptible plants during hot weather. Low volatile esters can be used during the early spring and late fall when the highest day temperature does not exceed 60 to 70 F. Try not to apply these herbicides when the air temperature exceeds 85°F or is so low as to prevent active weed growth. These herbicides are not safe on newly established turf when applied at the recommended rate for established turf areas.
Banvel is commonly added to broadleaf weed killer herbicides to control tough weeds, such as henbit and knotweed. Banvel is mobile in the soil and can be absorbed by roots of ornamentals and trees leading to their injury or death. Therefore, never apply Banvel or broadleaf weed killer herbicides containing Banvel within the drip line of ornamentals and trees.
Commonly, effective weed control with 2,4-D, Banvel, MCPP combinations involves more than one application. Two to four applications, spaced 10 to 14 days apart, may be necessary for satisfactory results. See Fact Sheet F-2654 Broadleaf Weed Control in Home Lawns, for more information on controlling broadleaf weeds.
Organic Arsenicals. The organic arsenicals (DSMA, MSMA, AMA, etc.) are primarily used to control summer grassy weeds such as crabgrass, Dallisgrass, foxtails, goosegrass, nutsedge (a grass-like weed), and sandbur soon after their emergence in May and June. These postemergence herbicides are selective and slightly systemic. Effective weed control normally involves two to four spray applications, spaced 10 to 14 days apart. The ideal temperature range for effective weed control from these herbicides with minimal risk of injuring your lawn is between 80 and 90 F. The organic arsenicals are safe for use on established bermudagrass, buffalograss, and Kentucky bluegrass when applied according to label instructions. Tall fescue and zoysiagrass have marginal tolerance, so injury can occur. Never apply organic arsenicals on centipedegrass or St. Augustinegrass. The organic arsenicals are rapidly inactivated in the soil.
Kerb (pronamide). Annual bluegrass, little barley, rescuegrass, cheat, downy brome, and other winter grassy weeds can be controlled in bermudagrass soon after their emergence in October and November. Kerb is a selective systemic herbicide, which has preemergence and postemergence activity. Effective weed control may involve more than one application. Since Kerb is root absorbed, wash this herbicide into the soil with 1/2 inch of water within 24 to 48 hours following application. Never apply Kerb on tall fescue, Kentucky bluegrass, or perennial ryegrass lawns.
Dowpon-M (dalapon) and Roundup are non-selective postemergence herbicides, which are Systemic. These are the most effective herbicides for control of tough perennial weeds. When applied at recommended label rates, Dowpon-M persists in the soil for three to four weeks, while Roundup persists in the soil for several days. Dowpon-M is labeled for weed control in non-crop areas, such as roadsides, fence rows, and drainage ditches. Roundup is labeled for the control of weeds prior to turfgrass establishment or renovation, trimming and edging, spot weed control, and for annual winter weed control in dormant bermudagrass.
Ortha Diquat Herbicide H/A and Phytar 560 are nonselective postemergence herbicides, which are contact. These herbicides are most effective in controlling young annual weeds. These herbicides are rapidly inactivated in the soil. Ortho Diquat Herbicide H/A is labeled for winter weed control in dormant bermudagrass, and Phytar 560 is labeled for weed control along sidewalks, driveways, ornamentals, fences, and buildings and for use during lawn renovation.
There are other kinds of weed and grass killers and spot weed killers. Always read and follow label instructions. Never allow spray or drift to come in contact with desirable plants.
Oklahoma State University Turfgrass Science Division Home Programs & Services Resources Media Program Areas Extension Departments Resources Media Field Research Units